If you have ever tried to install a wireless network at your house, you already know that it takes more than buying a router and powering it up. Setting up a wireless network in your home is not a walk in the park, but it does not have to be a headache, either. The good thing is that most manufacturers are going an extra mile in simplifying the process of setting up a wireless network to help non-technical users handle the tasks by themselves. Latest routers are now well labeled to help inexperienced users connect everything easily. Also, many routers being sold on the market today have a preset configuration a factor that makes installation much easier.
However, despite manufacturers making extra efforts to simplify the process of setting up a wireless network, do not assume everything will be as it is supposed to be after turning on your gadgets. You need to configure your network appropriately so that it can work properly and also ensure that security measures are in place. Here are great tips on How to Set Up and Configure Your Wireless Router that will be helpful to you.
Go for the best router
A router a crucial device that you will need for you to install a wireless network thus you should consider going for the best. There are many models of routers on the market today thus you should choose carefully to ensure that you have purchased the best. It is high recommended that you choose a dual-band router which operates on over 5 GHz electromagnetic spectrum to avoid network interruption from devices such as microwaves, cordless phone and remote controllers that operate on 2.4 GHz same as normal routers. You should also consider buying a router that has a detachable antenna to increase network range.
After choosing and buying a router that matches your needs, it is the high time you get it connected. If the service provider provided a modem to you after activating your internet service, then getting connected will be very easy. You will just have to follow the steps below.
- Switch off the modem.
- Disconnect the modem’s Ethernet cable from your PC.
- Connect the cable to the router.
- Switch on the modem and wait for a few minutes; about 2 minutes.
- Switch on the router and also wait for a few minutes; about 2 minutes.
- Now you can connect your PC to your router’s LAN port using another cable.
In most cases, routers are normally set to use DHCP which provides an IP address to your computer automatically. Therefore, if everything works out right, you should get connected online automatically.
In case you are using ISP supplied router, the process might be a little bit complicated. You will have to configure the ISP’s router to work in a bridge mode before connecting it to the newly installed router. This means that the existing router will not interfere with the network but just passes network traffic to the new router. You can either do this or ask for help from providers who can remotely do it for you.
Access the management console
After connecting your PC to the router, you can now customize the router’s configuration. Most wireless network routers being sold today are normally managed using a web browser whereby they are usually shipped with a default administrator account, IP address, and password. Once you have all this information you can easily access the management console. Just launch any web browser, enter the provided IP address. After this, you will be taken to a page where you can enter the username and password. Enter the details provided and upon hitting the enter button, you will now access the management console.
Changing passwords and upgrading the firmware
Once you have logged in, start by changing your passwords and username. Many individuals tend to ignore this step a factor that puts your network at a security risk. Any router running on default setting is vulnerable to anyone.
The next step you should take is upgrading the firmware to ensure that the router using the most updated firmware. This is necessary since you may not know how long the router has been sitting on the shelf and might be running on an outdated firmware which does not offer maximum protection and quality connection.
After ensuring that you have configured your network appropriately, you can now go ahead and set up a wireless network. With everything working accordingly, setting up your Wi-Fi should not take long. To do this, you need to ensure that you have connected your computer to an Ethernet cable; otherwise, you will lose connection to management console whenever you apply any changes to the configurations. Here is a detailed procedure for setting up a wireless network.
- Look for the Wireless setup section in the router’s management console. But it can be labeled differently depending on the router’s model.
- Wi-Fi is normally turned on, but if it is off you can turn it on. If you are using a dual-band wireless router should be able to view the 2.4 and 5 GHz networks. You need to configure both networks independently.
- You should ensure that the channel is on an audio setting, and the mode is on default settings, but you can change them later if you start experiencing slow connections.
- Now you can change the SSID or the ID name for your wireless connection. You can name it anything you want but do not leave it in the default value, try something descriptive. For instance, you can use PCM 24 or PCM 50 for 2.4 and 5 GHz networks respectively. In this case, PCM means PCMag.
- The last step is to setup your wireless network encryption. There several encryption choices that you can choose for your network.
When it comes to all types of networks security is usually a major concern. Many routers usually have a WPS or Wi-Fi Protected Setup a standard network security setup that is meant for securing networks simply by pressing a button. Disable this setup since it is highly vulnerable. Also, ensure that SSID is not broadcasting, this will make your network invisible to gadgets searching for a wireless network including yours. To get connected, you need to enter SSID manually.
While installing and configuring a wireless network at your home may seem to be a headache, by following the above steps you can easily install and enjoy a wireless network without hiring a professional.